Site icon Causes, How FIX Problem

LG washer error code CL

LG washer CL error code

The CL code in the LG washing machine is not an error. It is a so-called information code that reports a user about the “child lock” of the control panel enabling.

LG washer error code CL

The meaning of CL code in LG washing machines

If the LG washing machine shows the CL error, this does not mean a breakdown. This code informs the owner about the “child lock” mode activating. Therefore, the system blocks the panel with buttons, which prevents pressing during washing.

Small children can change a program, turn off the washing, and even break the LG appliance. The multifunctional appliance has a variety of functions. Thus, its panel is too sensitive and susceptible to breakage. For this, the manufacturer provides a security code.

The reasons for the code’s appearance

As we have already noted, the CL (Child Lock) error does not report a malfunction.

But what if you filled the tank with laundry, turned on the wash, but the machine doesn’t make any sounds, and only the CL code is displayed. So, if a user installs the lock once, then it saves for the next wash cycles. It happens even if the LG washing machine is turned off from the electrical network.

The error will appear until you disable the mode.

How to troubleshoot

To remove the CL error, you need to press the key combination on the control panel. It can differ for each model of the LG washing machine. Here is an example of the most typical commands. To use them, you need to press two buttons together for three seconds:

For more information, refer to the instructions for the LG washing machine. This should help to remove the CL error.

Note that buttons location differs. They can place under or above the display, or to the left of it.

How to recognize the lock buttons

The manufacturer marks the buttons with the toddler face on the panel or with a lock and smile.

LG “protection” must act differently for various washing machine models. The panel with buttons can block completely or partially. Along with that, the Enable / Disable button remains active. And it is not always convenient. The point is that if during washing a child suddenly turns off the machine, the electronic controller may get damaged.

Symptoms of breakage

When the LG washing machine shows the CL error on display, and you can not turn it off, this is a cause for concern. In normal operation, the protection function must be switched on and off by pressing the buttons. If this does not happen, a malfunction occurs.

What to do if you notice any fault signs

What to do in this case? It is necessary to check the multimeter control unit by disassembling the front panel. Then pull out the unit and check a loop on the tester.

Additionally, check the buttons’ contacts that may have become oxidized over time. Also, inspect the wiring of the control unit, connections, and joints.

If the control board fails, replace it, or contact the service center.

Exit mobile version